Insulated Wall Systems > MT 1000


Self-supporting insulated metal panels system, with hidden fasting for high quality aesthetic finish, suitable for use on industrial and commercial developments, as well as internal building partitions.
Because of the particular shape of the joint, blind fastening are applied to the V-cut on the male edge of the outside sheet.
Two screws with center distance of 30 mm should be used for each panel and each stud.
Panels can only be mounted vertically.

TABLE OF SAFE SPANS
Values guaranteed with steel sheets as thick as indicated. l spans (in metres), relevant to a uniformly distributed load p (daN/m2) were calculated, based on experimental data, in such a way as to guarantee a deflection f <= l/200 and a safety coefficient that complies with the UEAtc standards for insulated panels, which have been established and are implemented by primary European Certifying Organizations.
For safe spans relevant to negative loads, please contact METECNO.

Details


Manual
V-Assemb.









Metecno in the World
Homepage North America Europe South America Asia Central America English Italiano Español Franšais