Insulated Wall Systems > Superwall® ML Flat


Self-supporting metal panel system, insulated with rigid PUR foam, with a concealed-fixing method for high quality industrial and commercial buildings, where good aesthetics are required.
Because of the particular shape of the joint, blind fastening are applied to the V-cut on the male edge of the outside sheet. Two screws with center distance of 30 mm should be used for each panel and each stud.
Outside walls are made mounting such panels one next to the other, in both the orientations, vertical and horizontal.

TABLE OF SAFE SPANS
Values guaranteed with steel sheets, thickness 0.6 + 0.5 mm. Spans l in metres, as a function of a uniformly distributed load p (daN/m2), have been obtained from experimental data and calculated to provide a deflection limit: f <= l/200 of the span and a minimum safety coefficient that complies with the UEAtc standards for insulated panels, which have been established and are implemented by primary European Certifying Organizations. For safe spans relevant to relative loads, please contact us.




Details



Manual
V-Assemb.


Euronodes







Metecno in the World
Homepage North America Europe South America Asia Central America English Italiano Español Franšais